Our range of Gate traffic barriers offer cost-effective and practical traffic managements solutions. The range includes simple parking barriers as well as highly automated road with heavy traffic. These automatic road traffic barriers are easy-to-maintain and reliable. These are designed to provide long hours services.
This parking barrier gate operator is a heavy-duty, high performance barrier gate designed to be used in conjunction with other RFID hardware and RFID Parking Control Software in order to provide a complete RFID enabled parking solution. The parking barrier gate is typically utilized for medium to high traffic volumes and for wide lane management and has the capacity to be used for industrial facilities and to stand up to the harshest weather environments and operating conditions.
The parking barrier gate is useful for more than just parking lot solutions – this solution is ideal for apartments and Hotels, gated communities, business parking lots and garages, university parking areas and recreation operations from hotels to RV camps.
The parking barrier gate offers cost effective control of vehicle access for and is extremely dependable and reliable while providing advanced safety feature for both vehicles and pedestrians. The gate also offers a quick response time and can fully open in one to four seconds depending on upon arm length
Key Features – Parking Barrier Gate
Housing made of folded and welded sheet steel, from 2 to 6mm thick, protected by two coats of paint
Internal mechanical elements treated by ROHS-compliant electro galvanization
Removable cover and locked by key
Arm shaft mounted on two life-lubricated ball bearings. The protrusion of the shaft, centered on the housing side, allows it to be easily reversed from one side of the housing to the other
The arm is on the left or on the right of the framework housing is balanced by spring
Lever for manual unlocking (if not automatic mode set up)
control board enabling various additional commands and/or accessory options
Base frame to be fixed in a concrete base to be provided by the customer
Electro-mechanical assembly including:
- An asynchronous three-phase geared motor
- Movement transmission by crankshaft-rod device insuring mechanical locking of the boom arm in end positions
- Automatic barrier unlocking device in case of power failure, opening then being possible by hand
- Frequency converter ensuring progressive accelerations and controlled decelerations, for a vibration-free movement and enhanced protection of the mechanism (adjustable acceleration and braking ramps)
- Limit switches activated by leaf spring
Parameterizable information contacts:
- State of the barrier position (open or closed)
- State of the presence detectors
- Command for master-slave barriers (movement of one barrier controlled by the other barrier)
- Weather-resistant coating against hostile environments
The barrier system can be linked to any number of remote systems to control it operations, such as:
ANPR - Automatic Number Plate Recognition system, where a vehicles registration plate is taken and checked against a database, once verified the barrier arm raises to allow access.
Vehicle Tags - Where a tag is attached to specific vehicles, allow access to only authorised vehicle only.
Radio Transmitters - Any number or hand held radio remote control can be linked to the system.
Access Control System - Proximity card, Photo ID, Biometric Iris or Fingerprint reading technologies can be incorporated into the system.
Tokens - Standard issue tokens or high security token can be incorporated into the system.
Emergency Back Up - An emergency back up lowering facility is operational during any power failure and is fitted as standard, ensuring that the barrier can be raised in the event of a power failure, alternatively a UPS power system can be installed to keep the unit operational.
The ideal solution where you need to control access through a specific entrance or exit and can be linked to any access control system, token system, coin fee paid entry system or any other external operating device. Constructed from mild steel or stainless steel and are designed and manufactured to the highest quality standards for long lasting and durable performance, they can be installed internally or externally and are extremely easy to use and operate.
Tripod Turnstile:
Tripod turnstiles are straight forward and familiar to most users. The 3 arms can rotate in one or two directions, controlled by an access control system, movement detectors, push button, guard station, reception desk or a combination of systems.
The motorised version speeds up throughput whilst further facilitating the use of the tripod turnstile. After an authorising input from the access control system the arms inch forward to show the user that they have been authorised, then, after a small amount of pressure from the user the arms complete their cycle.
Glass Turnstile is three-wing turnstile, combined with either a tubular stainless steel frame, or a curved toughened glass panel and provides a secure enclosure. The frameless toughened glass door wings are mounted on a central column, which houses the drive, control and locking mechanisms.
Bidirectional Access
The Glass Turnstile allows by circular movement a fully automatic bidirectional access control and accommodates traffic of one person at a time. A stainless steel tube frame prevents unauthorised persons from walking in from the other direction.
When you need to protect the perimeter of your facilities, full height turnstiles are the ideal solution where you need to control access through a specific entrance or exit and can be linked to any access control system, token system, coin fee paid entry system or any other external operating device.
Full Height Single Turnstiles:
The single lane mechanical tripod turnstiles are straight forward and familiar to most users. The steel arms can rotate in one or two directions, controlled by an access control system, movement detectors, push button, guard station, reception desk or a combination of systems.
The motorised version speeds up throughput whilst further facilitating the use of the tripod turnstile. After an authorising input from the access control system the arms inch forward to show the user that they have been authorised, then, after a small amount of pressure from the user the arms complete their cycle. Full Height Single Turnstiles available in stylish stainless steel, chrome or painted finishes.
Full Height Double Turnstiles
The double lane mechanical tripod turnstiles are identical to the single lane turnstile counterparts, with the addition of a second lane, which can be used for two person to enter or leave simultanously or one in and one out, free enterance or exit, alternatively the turnstile cna be programmed to change over a certain times for peak flow traffic.
The turnstile arms can rotate in one or two directions, controlled by an access control system, movement detectors, push button, guard station, reception desk or a combination of systems.
The motorised version speeds up throughput whilst further facilitating the use of the tripod turnstile. After an authorising input from the access control system the arms inch forward to show the user that they have been authorised, then, after a small amount of pressure from the user the arms complete their cycle.
Full Height Double Turnstiles available in stylish stainless steel, chrome or painted finishes.
Waist high universal security gate :
Available in either a single or double unit facing each other to allow for gaps of up to 2 metres allowing for sufficient space for wheelchairs, trolleys and bulky goods.
The glass panels are motorised and can open in either direction. The units can be activated either by an access control system or a push button at the reception desk or guard station, or via an automatic access entry system.
Top
